Recently a lot of users have been reporting issues with Windows 10, but a lot of people believe that Microsoft did a pretty good job of fixing the issues with the April 2018 Update. And while some of the issues have been fixed, some of the problems still remain.
In my last post I briefly discussed the status of Windows Module Installer 5. Since then, I’ve been asked a lot of questions from people who installed Windows Module Installer 5 and can’t get it to work. I’ve been fairly quiet about the issue, and for good reason. The fix that has been rolled out by Microsoft was just a hotfix and it’s not a permanent solution to the problem. There’s a problem in the way Windows Module Installer 5 is implemented in the Windows 10 April 2018 Update (aka 1803), and it’s not going away.
If you’ve ever had problems with Windows 10’s embedded system, Windows Module Installer 5 is the new tool to help. WM5 is a new tool that’s part of the Windows Insider Program, but you’re only able to get it if you’re a member of the Insider Program. The tool can help you troubleshoot issues that are caused by the Windows 10 OS.
Occasionally, the PC or laptop may exhibit odd behavior, such as operating excessively hot or slowly, shutting down, making a lot of noise, and a variety of other problems. The ” Windows modules installation is causing excessive CPU usage” will be shown in your Task Manager. What am I supposed to do now? Don’t be concerned! Continue reading below to learn all you need to know about Window Module Installer. What can be done about the issue of overheating?
What is a Worker for Windows Module Installer?
Windows Module Installer is a fundamental Windows component that will search your PC or laptop for system or other Microsoft updates and install them if they are available. It’s one of the most crucial parts for keeping your system operating smoothly and effectively. Windows Module Installer Worker ( WMIW ) or TiWorker are other names for it. It is important for your System since it plays a critical part in the operation of your PC.
When you install a new updated version of Windows on your PC or laptop, it will immediately update all of your files and backup your old data, allowing you to access it in a newer version of Windows. Because of its vast activities, the procedure requires a significant quantity of computing power and space.
As a result, the mistake happened. Your computer or laptop will begin to make a lot of noise, heat up, and shut down.
The use of a lot of CPU performance by “Windows module installer” is due to the following reasons.
As previously said, installing a new version of Windows necessitates upgrading all associated programs and data, which is a lengthy operation that consumes a lot of CPU and HDD space. Your Task Manager will display the problem during the upgrades.
If you see the warning “Windows Module Installer utilizing high CPU,” don’t panic; after the procedure is finished, your CPU will automatically settle down.
The primary issue arises when you are required to monitor the same CPU and HDD use even after hours of updating has been completed. There may be some issues. If your CPU isn’t powerful enough to withstand the heat and severe conditions, it’s more likely to freeze, shut down, or slow down.
How can I quickly resolve the problem of high CPU usage?
Do you have problems with your computer shutting down, operating slowly, freezing, and other issues? Because to Windows Module Installer Worker or worker.exe, you are experiencing excessive CPU use in Windows 10. Here are several solutions to the problem:
Wait for the next update. Complete
Allow extra time for your PC to update, and remember to turn off any other programs on your computer to give the upgrading process the most CPU time. If you’re expected to see that the update is complete, reboot your computer or laptop and check to see if the updates are still installing or updating; if they’re updating, wait for all updates to finish before continuing; if all updates are finished, continue with your work.
Run the Troubleshooter for Windows Updates.
Due to a variety of factors, the process of installing updates may get stuck at times. If you get a black screen with a freeze, you’ll need to run Window Update Troubleshooter, but how do you do that? To take action, follow the steps below:
Restart your computer or laptop:
- Use the shortcut keys on the keyboard Alt+F4
- Select the option to Restart.
- Press the enter key twice.
- Your computer or laptop will restart on its own.
Follow the procedures below once the system has been rebooted:
- Select the Start Menu option from the Start Menu drop-down menu.
- In the search box, type Settings.
- Choose “run as administrator” from the context menu when you right-click on setting a.
- Select the “system or security” symbol from the drop-down menu.
- Select “Troubleshoot” from the drop-down menu.
- Invoke the help of “additional troubleshooters”
- Select “Windows Updates” from the drop-down menu.
The actions outlined above will complete your pending update or installation.
Windows Update Repair Utility is a hidden Microsoft tool that may help you fix your Windows updates.
If the previous methods do not work for you, you must use the “Microsoft Hidden Windows Update Repair Utility,” which can be found here. Follow the steps below to complete the process:
- The “Microsoft Hidden Windows Update Repair Utility” may be downloaded from the Microsoft website.
- After you’ve finished downloading, unzip the files and run them on your computer.
- From the Start Menu, choose Command Prompt.
- The command is inserted.
- Steps 1 and 2 are performed by pressing the Y button.
- After you’ve finished the instructions, reboot your computer.
- This will result in the removal of all unneeded temporary files and the repair of all Windows updates.
Your CPU Should Be Physically Clean
If nothing else helps to resolve the issue, you should do a thorough physical cleaning of your system. To do so, follow the procedures below:
- Carefully open your CPU case from one side.
- Remove the RAM and wipe it with cloth.
- After cleaning, unplug all wires and reconnect them.
- Remove the CPU fan and rebuild it after applying some thermal lubricant to the processor.
- Clean the dirt and mist from your Motherboard using a hair dryer.
- After everything has been completed, reassemble your PC and restart it.
Because the elimination of carbon between the components and the motherboard improves the rate of traction, it is clear that performance will be improved after a thorough physical cleaning of your CPU.
Use a good system management program.
You should download and install any efficient and ethical system management program or software, such as AVG, 360-total clean, Avast, and others, to fix the problem.
They’ll keep track on your CPU’s performance and keep it from crashing due to excessive use. You may utilize “Sleep Mode” if you want to be ahead of the game. The mode will prevent all programs and files from taking use of the CPU’s and disk space’s precious resources. This will prepare your system to finish the update procedure.
It will guarantee that sufficient power is available for an update. You should also utilize a function that every state management program has, namely “Disk Cleaning,” which allows you to perform a last system scan.
After utilizing both functions, restart your PC or laptop. It will guarantee that the upgrade procedure runs smoothly without requiring your Windows Module Installer to consume a lot of CPU power or take up a lot of disk space.
Is it possible to disable Windows Module Installer?
There are many guides on the internet that recommend disabling the Windows Module Installer system service from your computer in order to decrease CPU consumption. We don’t recommend disabling it since it will prevent Windows from installing the most recent updates on your computer.
Furthermore, some internet guides may advise you to limit your network connection. This just prevents Windows from downloading and installing updates on your computer automatically. Yes, this will prevent the Windows Module Installer from starting. However, doing so may prevent your computer from receiving the most recent security updates, which protect your system from viruses. This is also not a good option.
You may simply install Windows Module Installer on your computer and run it to install the newest updates. After a manual update, the Installer will proceed.
Is it a virus of some sort?
No, it isn’t a virus. The Windows Module Installer Worker is a built-in component of Windows. There have been no reports of malware masquerading as the Installer or TiWorker.exe processes, but if you are concerned about malware, you should perform a complete system scan with your antivirus software.
After that, we’ll show you how to fix the problem of “Windows modules installer is causing excessive CPU use.” All of the procedures above are suitable with all versions of Windows, including Windows 10 and Windows 10 Pro.
Never switch off the Windows Module Installer since it keeps your computer safe by applying all necessary updates automatically. You will miss an essential software update if it is switched off. If you disable the program, your system will be susceptible to security vulnerabilities, which may lead to cyber-attacks.
Another crucial step not addressed by the techniques above is to utilize high-quality components; cheap and low-quality components will cause a slew of problems, particularly with CPU performance.
Articles Related to This:
In a VIRTUAL MACHINE, run macOS on Windows 10.
Steam Won’t Open on Windows 10: 4 Solutions
[RESOLVED] Audio Renderer Error on Windows 10
How to Change Windows 10 Language
Windows 10 is a breakthrough release from Microsoft, and to make sure it runs the best, it is important to make sure that all the proper drivers are installed. This is easier said than done, especially if you are using a laptop. In this blog post, we will show you how you can install all the necessary drivers, including the faulty one from the Windows 10 Anniversary Update.. Read more about windows modules installer worker high disk usage windows 10 and let us know what you think.
Frequently Asked Questions
How do I fix Windows module installer?
Windows module installer is a program that helps you install the modules for your computer. If you are having issues with this, it may be because of an issue with your internet connection or antivirus software.
Can I stop Windows module installer?
Yes, you can stop Windows module installer.
How do I fix windows modules installer worker with high disk usage?
If you are having trouble with your Windows modules installer worker, it is possible that the disk space is full. You can try running a disk cleanup tool to free up some space on your hard drive.
This article broadly covered the following related topics:
- windows modules installer worker high cpu
- windows modules installer worker windows 10
- windows modules installer worker high disk usage windows 10
- windows modules installer windows 7
- windows modules installer worker